Switch ip-com g1118p-16-250w 16p glan poe+ +2sfp supporto vlan

Foto e descrizione sono da ritenersi a scopo illustrativo

Produttore: IP-COM
Codice Prodotto: IC-G1118P-250
EAN: 6932392831921
Cod. Gallo System: G1118P250

1 unità disponibile

G1118P-16-250W

16GE+2SFP Ethernet Unmanaged Switch With 16-Port PoE

Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x and IEEE802.3af/at standards.
16 * 100/1000 Mbps Base-T RJ45 ports for data transmission and power supply,
2 * 1000 Mbps Base-X SFP slots.
8K MAC address table and MAC address auto-learning.
IEEE 802.3x-compliant full-duplex ﬂow control and half-duplex backpressure ﬂow control.
36Gbps backplane bandwidth.
Maximum power consumption of a single port: 30W; Maximum power consumption of the switch: 250W.
4 modes: standard, priority, extend and VLAN.
Rack mounting.

G1118P-16-250W is a unmanaged PoE switch independently designed by IP-COM. Compliant with IEEE 802.3af and IEEE 802.3at standards, it can identify PoE-powered devices intelli-gently. With a maximum PoE power output of 230 W, and 30 W for a single port, it can supply power hen transmitting data with APs, IP cameras, and IP phones. The switch supports 4 working modes, including standard, priority, extend and VLAN modes, is an ideal choice for SMBs, hotels, schools, factories with video surveillance and wireless networking require-ments.

6kV lightning protection

The switch oﬀers various safety and protection types, including 6kV lightning protection, PSE short-circuit protection, PoE overload protec-tion, surge current protection etc.

Gigabit uplink port

With two 1000 Mbps SFP slots, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance.

230W PoE power supply

The switch features 16 IEEE 802.3at/af-compliant RJ45 ports. The entire switch oﬀers a maximum PoE power output of 230W, and 30W for a single port, to supply power to and data transmission with 16 PoE-pow-ered devices such as APs and IP cameras.

One-key to switch 4 modes

It supports 4 working modes, including standard, priority, extend and VLAN modes. The hardware DIP mode switch makes networking straight-forward and eﬀortless.

Visualizza Scheda Tecnica

Model	G1118P-16-250W
Interfaces	16 * 100/1000 Mbps Base-T RJ45 ports (Data/Power) 2* 1000 Mbps Base-X SFP port
Lightning protection	≥6KV
Forwarding mode	Store-and-forward
Switching capability	36 Gbps
Packet forwarding rate	26.8 Mpps
Buffer	2M
MAC address table	8K
PoE supply	Ports 1-16 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power
Power consumption	250W output the whole device
Input voltage	AC: 100-240V~50/60Hz
Dimensions	440178.844mm
Four Modes	Standard: Default mode of the switch. In this mode, it works as an unmanaged switch;all ports can communicate with each other separately. Priority: In this mode, port 15,16,SFP1 and SFP2 serve as uplink ports, ports 1 ‒ 8 serve as high priority port. All ports can communicate with each other separately. Extend: In this mode, data rate of ports 9 - 14 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 - 14 of the switch can communicate with port15,16, SFP1, SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
Operating environment	Operating Temperature: 0℃~45℃ (32℉~113℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certificates	FCC、CE、RoHS